Pipe–in–Pipe
Optical
sensor
DOWNLOAD
Pipe–in–Pipe
Optical sensor
Andel worked together with Durapipe, one of the world’s largest double containment pipework manufacturers to develop the Andel – Floodline DP01 Pipe-in-Pipe Sensor for use in pipe-in-pipe systems, double contained tanks and other projects where interstitial monitoring is required.
- Applications
The Andel – Floodline DP01 Pipe-in-Pipe Sensor is designed for use either as a stand-alone leak detection system which can be connected directly to a standard monitoring system OR can be interfaced eithersingly or in multiples with one of Andel’s range of Floodline leak detection control panels. - Detection
The sensor uses infra-red to detect the presence of any liquid touching the sensor dome. When liquid is detected the relay within the local control unit will turn off and this is detected by either a monitoring system or a Floodline panel. The relay will also turn off if the sensor should become disconnected or if the power should fail. - Function
Water/Oil leak detection. Can be used with most liquids, call for confirmation. - Control construction
IP65 rated polycarbonate enclosure in light grey (RAL
7035)
- Control dimensions
L120 x W80 x D55 mm - Control fixing
Screw holes in enclosure back - Sensor contruction
IP65 rated, encapsulated uPVC in a mid/dark grey - Sensor cable
2m length - Sensor fixing
Standard fitting ½” or 1” BSP male thread (please specify when ordering) - Power
Supply Voltage: 9-30 Vdc
Supply current: 18mA (standby)
7mA (when in alarm)